Engineering is the application of the principles of science for welfare of human being.
Wednesday, 5 November 2025
Wednesday, 8 March 2017
APPLIED MECHANICS : BASIC CONCEPTS
DEPARTMENT OF MECHANICAL ENGINEERING
APPLIED MECHANICS/BASIC CONCEPT
Motion: When the position of a body changes
with respect to its surroundings, the body is said to be in motion.
Rest: When a body does not change its position
with respect to its surroundings, it is said to be in rest.
Rest and motion are
relative terms.
Physical
Quantities: All the
quantities in terms of which laws of Physics are described and whose
measurement is necessary are called physical quantities.
Scalar
Quantities: Any
physical quantity which can be completely specified by its magnitude alone, is
a scalar quantity.
Vector
Quantities: Any
physical quantity which requires direction in addition to its magnitude, is
known as a vector quantity.
Distance: The length of the path travelled by
a body in a certain interval of time is known as distance.
Displacement: The shortest distance between the
initial and final positions of a body is known as displacement.
Speed: It is the distance travelled by the body
along a straight line or curved path per unit time.
Velocity: Velocity is defined as change of
position of a moving body in a definite direction per unit time or the distance
travelled by the moving body per unit time in a given direction.
Acceleration: The rate of change of velocity of a
moving body with time is called acceleration.
Mass: The mass of a body is the quantity
of matter (material) contained in it.
Force: A force may be defined as an
external cause which changes or tends to change its state of rest, or of
uniform motion, direction of motion, or shape of the object.
Momentum: Momentum of a body is the product of
its mass and velocity.
Impulse: The impulse acting on a body is
defined as the product of force acting on the body and time taken for which it
acts.
Inertia: Inertia is inability of a body to
change by itself.
Friction: Friction is the force which always
opposes the motion of one body over another body in contact with it.
Gravitation: Gravitation is the name given to the
force of attraction acting between any two bodies in the universe.
Gravity: It is the force of attraction
exerted by earth towards its centre, on a body lying on or near the surface of
earth. It is the measure of weight of the body.
Acceleration
Due To Gravity: It
is defined as the acceleration set up in a body while falling freely under the
effect of gravity alone.
Work: Whenever a force acts on a body and
moves it in its direction, work is said to be done by the force and is measured
by the product of the force and the displacement in the direction of force.
Power: Power is defined as the rate of
doing work.
Energy: The capacity of doing work is called
energy.
Space: It is a region which extends in all directions
in the universe and contains everything in it. The position of a point in space
is defined by some frame of reference and coordinate system. In order to define
the state of rest or of motion of a body , some datum or reference is required.
Time: It
is a measure of succession of events.
Matter: It
is anything that occupies space and has physical existence.
Particle: It
is defined as an object whose mass is concentrated at a point.
Body: A body
is a portion of matter which occupies finite space and consists of number of
particles.
Rigid Body: A
rigid body is that which does not change its shape or size when subjected to
external forces.
Applied Mechanics: The
science which deals with the physical state of rest or of motion of rigid
bodies under the action of external forces, when applied to engineering
problems is termed as Applied Mechanics.
Characteristics of A Force:
1. Magnitude 2.
Direction
3. Point of Application 4. Line of Action
Tuesday, 21 June 2016
CV
CURRICULUM – VITAE
Er. Vijay Kumar
Pandey
62, A.D.A. Colony
Jhunsi, Allahabad
U.P. Pin- 211019
Contact No- 09936373151
……………………………………………………………………………………………………………………………………………….
CAREER OBJECTIVE
To
work in any Organization/University/Institute where, I can apply my knowledge
& experience for any type of engineering & teaching work.
CURRENT ASSOCIATION
v M.G.P. College, Allahabad, as Faculty in
Mechanical Engineering Department.
EXPERIENCE
v Teaching Experience in
Engineering College (More than 7 Years).
·
M.G.P College(Board of Technical Education- U.P.), Allahabad [From August 2014 to Present
Date]
·
M.G.R.P College, Allahabad [From August 2012 to July 2014]
·
A.P.M.I.T. (Affiliated to Gautam Buddh Technical
University),Allahabad [From July 2010 to July 2012.]
·
U.N.S. Institute of Engineering & Technology (Purvanchal
University), Jaunpur. [From January 2009
to March 2010.]
v Certificate of Examiner
·
Certificate of Examiner for evaluation of BTE-Board Exam copies
·
Certificate of Examiner for Pracitcal Examination of
BTE Board.
·
Certificate of Examiner for Pracitcal Examination of
GBTU.
v Worked as
Institute- Representative for Exam related duties at Exam Centre.
PROFESSIONAL BODIES
v Membership of I.S.T.E. (Indian Society For
Technical Education), DELHI.
v Membership of TLC, Lucknow.
v Membership of CAFET INNOVA Technical
Society, HYDERABAD.
EDUCATIONAL QUALIFICATION
v M. Tech. in Mechanical Engineering with specialization in
Production Technology from KSOU, Karnataka. (66.11%) *2014
v B. Tech. in Mechanical Engineering with 64.8% from U.N.S.
Institute of Engineering & Technology, V.B.S. Purvanchal University,
Jaunpur (U.P.) *2008
v Intermediate with 56%
from U.P. Board. *1997
v High School with 63.5 %
from U.P. Board. *1995
TECHNICAL QUALIFICATION
v
C.N.C. Programming & Operation Certificate from ‘National Small
Industries Corporation’ (Government of India) NEW DELHI, with a very good performance.
v
C.I.C. Certificate from Central University (IGNOU, Delhi)
v
Certificate in ‘CADD’ (Mechanical Engineering), from CADD Centre, ALLAHABAD.
v
Course on Computer Concepts (CCC) from NIELIT.
SEMINAR/FDP ATTENDED
v
Certificate of Participation(Faculty Development
Program)
in ‘Quality
Improvement Program on Advanced Total Quality Management & It’s
Contemporary Applications’, sponsored by ‘All India Council for Technical Education’ in Banaras Hindu
University,
VARANASI. [22nd -27th
March, 2010]
v
Certificate of Participation (Two Day Workshop) in ‘Sheet Metal Tool Design
& Forming Analysis’, organized by DHIO Research & Engineering Pvt. Ltd, BANGALORE. [28th -29th
January, 2011]
v
Certificate of Participation (2 Day International
Seminar)
in ‘Professional
Education in India, The Quality Paradigm’ organized by FMS, BHU in association with GLA
University,
in Banaras Hindu University, VARANASI. [23rd -24th April, 2011]
v
Certificate of Participation (2 Day International
Seminar)
in ‘Innovative
Practices in Education’ organized by ‘The Learning Community’ with Lucknow University at
H.L.Y.G.D. COLLEGE, LUCKNOW. [18th -19th June, 2011]
v
Certificate of Participation (National Workshop) in ‘Paper Presentation
Awareness and Research Methodology’ organized by IIIT- Hyderabad in association with
Nottingham Trent University at IIIT-HYDERABAD. [June-26/2011]
v
Certificate of Participation(Faculty Development
Program)
in
‘Recent Development in the Design of Press Tools, Jigs and Fixtures ’Sponsored by ‘All India Council for
Technical Education’ and MHRD at NIT- CALICUT,
KERALA. [4th - 9th
July, 2011]
v
Certificate of Participation(2 Day International
Workshop)
in “Post
Economic Meltdown Era, Challenges &
Strategies” organized by FMS,BHU in association with AMDISA & Alliance
University (Bengaluru) at BHU, Varanasi. [4th - 5th Feb, 2012]
v
Certificate of Presentation (2 Day International
Seminar)
in “Professional
Development of Teachers” organized by TLC, Lucknow
in association with ‘WPMT’, ‘AATL’, ‘ASSR’, ‘IERA’ & ‘GERA’. at
S.C.B.I.H.E., Lucknow. [17th - 18th Nov, 2012]
v
Certificate of Participation(2 Day Conference) on “Contemporary Relevance of
Mahamana’s Vision and Thought ” organized by FMS,BHU at BHU, Varanasi. [8th - 9th Dec,
2012]
v
Certificate of Participation (5 Day Short Term Training
Programme)
in “Role of
Basic Science in Engineering Education” jointly organized by Deptt. Of
Mathematics, Chemistry & Physics of MNNIT at Motilal Nehru National
Institute of Technology(MNNIT), Allahabad. [12th - 16th
June, 2013]
v
Certificate of Participation(National Conference) on “Challenges and
Opportunities for Technological Innovation in India” organized by Ambalika
Institute of Management and Technology at AIMT Campus, Lucknow.[22nd
Feb, 2014]
v
Certificate of Participation (3 Day Workshop) in “Disasters & Their
Management” organized
by Department Of Civil Engineering- MNNIT at Motilal Nehru National Institute
of Technology(MNNIT), Allahabad. [29th – 31st
May, 2014]
v
Certificate of Presentation (2 Day International Conference) in “Trends & Innovative Practices
in Education” organized by Ramgarhia college of Education, Punjab in association with ‘Alpha Global
Enterprises' at Ramgarhia College of Education, Punjab. [03rd - 04th
March, 2015]
v
Certificate of Participation (Two
week
Workshop)
in “Environmental
Studies” organized
by IIT-Bombay and sponsored by MHRD, Government of India held at Motilal Nehru
National Institute of Technology(MNNIT), Allahabad. [ 2nd – 12th June, 2015]
ARTICLE PUBLISHED:
v “Teacher &
Professional Development” in the Journal, Scholary International
Multidisciplinary Print Journal- Pune (Book Number-ISSN:2395-0609)
PROJECT & TRAINING
v To increase the
efficiency of I.C. Engine by using water.
v Vocational Training Certificate with a very good
performance from Singrauli Thermal Power
Station, SHAKTI NAGAR(A Super National Thermal Power Corporation of India)
SUBJECTS TAUGHT:
v Engineering Mechanics -Mechanics of Solids
v Manufacturing Process -Fluid Mechanics
v Material Science -Mechanical Measurement
& Metrology
v Automobile Engineering -Industrial Management
v Machine Design -Theory of Machines
PERSONAL SKILLS
v Comprehensive problem
solving abilities, excellent verbal and written communication skills, ability
to deal with people diplomatically, willingness to learn, team facilitator and
doing hard work.
PERSONAL PROFILE
v Name : Vijay Kumar Pandey
v Father’s Name : Badri Prasad Pandey
v Nationality : Indian
v D.O.B : 04/04/1980
v Hobby : Playing Harmonium
v Language Known : Hindi
and English
v Contact No : 09936373151
DECLARATION
v I hereby declare that all
the information furnished above are true and correct to my knowledge.
Date……………
Place………….. (Er. Vijay Kumar Pandey)
Sunday, 19 April 2015
profile, vijay pandey
CURRICULUM – VITAE
Er. Vijay Kumar Pandey
62, A.D.A. Colony
Jhunsi, Allahabad
U.P. Pin- 211019
Contact No- 09936373151
……………………………………………………………………………………………………………………………………………….………………………………………………………………………................
CAREER OBJECTIVE
To work in any Organization/University/Institute where, I can apply my knowledge & experience for any type of engineering & teaching work.
CURRENT ASSOCIATION
• M.G.P. College, Allahabad, as Faculty in Mechanical Engineering Department.
EXPERIENCE
• Teaching Experience in Engineering College (More than 6 Years).
• M.G.P College(Board of Technical Education- U.P.), Allahabad [From August 2014 to Present Date]
• M.G.R.P College, Allahabad [From August 2012 to July 2014]
• A.P.M.I.T. (Affiliated to Gautam Buddh Technical University),Allahabad [From July 2010 to July 2012.]
• U.N.S. Institute of Engineering & Technology (Purvanchal University), Jaunpur. [From January 2009 to March 2010.]
PROFESSIONAL BODIES
• Membership of I.S.T.E. (Indian Society For Technical Education), DELHI.
• Membership of TLC, Lucknow.
• Membership of CAFET INNOVA Technical Society, HYDERABAD.
EDUCATIONAL QUALIFICATION
• M. Tech. in Mechanical Engineering with specialization in Production Technology from KSOU, Karnataka. (66.2%)
• B. Tech. in Mechanical Engineering with 64.8% from U.N.S. Institute of Engineering & Technology, V.B.S. Purvanchal University, Jaunpur (U.P.)
• Intermediate with 56% from U.P. Board.
• High School with 63.5 % from U.P. Board.
TECHNICAL QUALIFICATION
• C.N.C. Programming & Operation Certificate from ‘National Small Industries Corporation’ (Government of India) NEW DELHI, with a very good performance.
• C.I.C. Certificate from Central University (IGNOU, Delhi)
• Certificate in ‘CADD’ (Mechanical Engineering), from CADD Centre, ALLAHABAD.
SEMINAR/FDP ATTENDED
• Certificate of Participation(Faculty Development Program) in
‘Quality Improvement Program on Advanced Total Quality
Management & It’s Contemporary Applications’, sponsored by ‘All
India Council for Technical Education’ in Banaras Hindu University,
VARANASI. [22nd -27th March, 2010]
• Certificate of Participation (Two Day Workshop) in ‘Sheet Metal Tool Design & Forming Analysis’, organized by DHIO Research & Engineering Pvt. Ltd, BANGALORE. [28th -29th January, 2011]
• Certificate of Participation (2 Day International Seminar) in
‘Professional Education in India, The Quality Paradigm’ organized by FMS, BHU in association with GLA University, in Banaras Hindu
University, VARANASI. [23rd -24th April, 2011]
• Certificate of Participation (2 Day International Seminar) in ‘Innovative Practices in Education’ organized by ‘The Learning Community’ with Lucknow University at H.L.Y.G.D. COLLEGE, LUCKNOW. [18th -19th June, 2011]
• Certificate of Participation (National Workshop) in ‘Paper
Presentation Awareness and Research Methodology’ organized by
IIIT- Hyderabad in association with Nottingham Trent University at
IIIT-HYDERABAD. [June-26/2011]
• Certificate of Participation(Faculty Development Program) in ‘Recent Development in the Design of Press Tools, Jigs and Fixtures ’Sponsored by ‘All India Council for Technical Education’ and MHRD at NIT- CALICUT, KERALA. [4th - 9th July, 2011]
• Certificate of Participation(2 Day International Workshop) in “Post Economic Meltdown Era, Challenges & Strategies” organized by FMS,BHU in association with AMDISA & Alliance University (Bengaluru) at BHU, Varanasi. [4th - 5th Feb, 2012]
• Certificate of Presentation (2 Day International Seminar) in “Professional Development of Teachers” organized by TLC, Lucknow in association with ‘WPMT’, ‘AATL’, ‘ASSR’, ‘IERA’ & ‘GERA’. at S.C.B.I.H.E., Lucknow. [17th - 18th Nov, 2012]
• Certificate of Participation(2 Day Conference) on “Contemporary Relevence of Mahamana’s Vision and Thought ” organized by FMS,BHU at BHU, Varanasi. [8th - 9th Dec, 2012]
• Certificate of Participation (5 Day Short Term Training Programme) in “Role of Basic Science in Engineering Education” jointly organized by Deptt. Of Mathematics, Chemistry & Physics of MNNIT at Motilal Nehru National Institute of Technology(MNNIT), Allahabad. [12th - 16th June, 2013]
• Certificate of Participation(National Conference) on “Challenges and Opportunities for Technological Innovation in India” organized by Ambalika Institute of Management and Technology at AIMT Campus, Lucknow.[22nd Feb, 2014]
• Certificate of Participation (3 Day Workshop) in “Disasters & Their Management” organized by Department Of Civil Engineering- MNNIT at Motilal Nehru National Institute of Technology(MNNIT), Allahabad. [29th – 31st May, 2014]
• Certificate of Presentation (2 Day International Conference) in “Trends & Innovative Practices in Education” organized by Ramgarhia college of Education, Punjab in association with ‘Alpha Global Enterprises' at Ramgarhia College of Education, Punjab. [03rd - 04th March, 2015]
ARTICLE PUBLISHED:
• “Teacher & Professional Development” in the book (Book Number-ISBN-978-93-81274-27-9) published by ‘New Delhi Publishers’ regarding International Seminar at Lucknow.
PROJECT & TRAINING
• To increase the efficiency of I.C. Engine by using water.
• Vocational Training Certificate with a very good performance from Singrauli Thermal Power Station, SHAKTI NAGAR(A Super National Thermal Power Corporation of India)
SUBJECTS TAUGHT:
• Engineering Mechanics -Engineering Drawing
• Manufacturing Process -Fluid Mechanics
• Material Science -Mechanical Measurement & Metrology
• Automobile Engineering -Industrial Management
• Machine Design -Theory of Machines
PERSONAL SKILLS
• Comprehensive problem solving abilities, excellent verbal and written communication skills, ability to deal with people diplomatically, willingness to learn, team facilitator and doing hard work.
PERSONAL PROFILE
• Name : Vijay Kumar Pandey
• Father’s Name : Badri Prasad Pandey
• Nationality : Indian
• D.O.B : 04/04/1980
• Hobby : Playing Harmonium
• Language Known : Hindi and English
• Contact No : 09936373151
DECLARATION
• I hereby declare that all the information furnished above are true and correct to my knowledge.
Date……………
Place………….. (Er. Vijay Kumar Pandey)
Subscribe to:
Comments (Atom)